Nikon D3400 and Video

The other thing that is really important when you are shooting d3400 video is to understand that you are liberated by the moving image. What I mean by that is that when you are shooting a still particularly if you are shooting a still that you want to tell a story, then you will try to get certain components of that story into the frame, because those components in that frame and where they are positioned in that frame will help in that storytelling process. When you are shooting video you can have various components of the story, but not necessarily in the frame at the same time, because you can move the camera and the video will move with it from one component to the other and so, in doing so, bring those two components together. But they do not have to be in the frame at the same time. That is a really interesting skill to try to develop and it really brings your videography up to a much higher level, but it is something that for a stills photographer can be quite difficult to understand and quite difficult really to execute very well. Those are the two elements – sound and composition – which you will need to explore further and consider more when you are shooting video than when you are normally shooting stills.

So lets now take a look at the camera and see how we can prepare it to shoot videos. First of all we switch it on and we open up the lens. Now the interesting thing about this camera, unlike some other cameras, is it doesn’t have a specific video mode on the MODE DIAL. What that means is that you can shoot video in pretty much any of the modes. In some cases it does not make a great deal of difference and in others it makes a little difference. I would recommend really that you either leave it on AUTO or you leave it on MANUAL because when it comes to video modes you either have an automatic mode, which essentially does everything for you, or you switch it over to manual where you can have much more control.

I am going to switch it on to Auto initially so that we can have a look through that. So having switched the camera on then I go into menus and if I go into the SHOOTING MENU and at the bottom option there are MOVIE SETTINGS. These are the only settings which are specifically for shooting video and they are all in one place. If I go into that then I have various options – frame size and frame rate, movie quality. the microphone, wind noise reduction and manual movie settings. Lets start from the beginning and have a look at frame size and frame rate. If I click on there there is a long list of different frame rates and frame sizes. It is useful at this point to explain where they come from and how important they actually are. So 1920 x 1080 is Full HD and is probably about the best quality you can shoot on a DSLR at the moment outside of 4k, which is the revolutionary new system which not many people are using. Certainly in terms of social media – YouTube or Vimeo or any of those platforms – they are more than happy to take 1920 x 1080 and in fact they are more than happy to take also the one down towards the bottom here which is 1280 x 720. 1280 x 720 is called HD and 1920 x 1080 is called Full HD, so they are the frame sizes. If you like they they reflect the similar parameters to the file size of a still image so 1920 x 1080 is larger than 1280 x 720.

The next choice in the Nikon d3400 video settings is the frame rate. Now you have various frame rates here and they are different for different reasons. I am going to put this camera down and try and explain first of all why you have 60 and 30 frames per second and 50 and 25 frames per second, because whilst it might not seem terribly important it can be. These refer to television systems and in the United States there is a system called NTSC and NTSC runs at 60 Hertz. In Europe predominantly and also other parts of the world there is a system called PAL and PAL runs at 50 Hertz.

So if we now come out of frame size and frame rate, the next one down is MOVIE QUALITY and that option is either HIGH or NORMAL. Obviously, I would recommend that you choose high quality. The important thing to remember here is that, regardless of whether you shoot 60 or 30 frames per second, you are going to use a large amount of space on your memory cards, so an ordinary memory card when you are shooting video would be minimum size I would say 16 gigabytes and probably you will be looking at 32 gigabytes. Below that is MICROPHONE. As you probably know this camera does not have an external microphone socket. It does have an internal microphone and that is here and in fact it is not too bad. If we go into the microphone settings then we have three choices: the first one is MICROPHONE OFF which I do not recommend even if you do not really intend to run the sound. The reason is that having the microphone on and therefore having sound on your video even when you are editing can be useful because it can help you remember which clip is which. Then the other two settings are AUTO SENSITIVITY and MANUAL SENSITIVITY. Then the bottom option is MANUAL MOVIE SETTINGS. As I said right at the beginning you can shoot on auto or on manual settings on this camera. However, if you do not switch manual movie settings on here, then even if you switch around to manual settings, it will still run on auto settings because you have not told the camera that you want it to run on manual settings.

So lets move it around to MANUAL in the Mode Dial and see what I can change when I am in the manual mode. I go back into the Liveview here and I just make sure that I go round so that I am on the video settings here. Now, again it does not give me any more details here it just tells me the basics. Again it has the microphone in the bottom left hand corner, but if I press the I button then it gives me a lot more that I can choose from. It gives me again the movie frame and quality, but it allows me to change the white balance. It also gives me microphone, it allows me to change the ISO, it allows me to change the picture control, the wind noise reduction again, but they also allow me to change the auto focus area mode as well as the focus mode, so there are more things here that I can change when I am in manual mode. But lets have a look now and see how I can change the three more elements which are our shutter speed, aperture and ISO which is why I am in manual mode.

But lets have a look now and see how I can change the three more import elements which are our shutter speed, aperture and ISO which is why I am in manual mode. Now there are two elements here that I can change actually when I am shooting video. The one I can not do – the one on this set beforehand – is the Aperture and I need to come out of Liveview here and go back into normal manual mode, basically, in order to change the aperture. So if I come out of Liveview now and press the AUTO EXPOSURE button at the top and then use the main dial I can change the aperture to make it go up or down. In this instance I am down to f/4 and I can see here that I have got the ISO and the shutter speed at normal settings because essentially I mean stills setting. Here when I go into Liveview at the back then the aperture is set as we have just done it but I have the options now when I am either here before I shoot the video or during the video to change the shutter speed and the ISO. The way I change the ISO is by using this function button. Now if you looked at the setup menu video you will know that there is an option there called buttons and I can set this function button to ISO and I did that at the time because I think I said at the time that it helped video. This is why – because now I can just set the function button and on the back screen the ISO option goes yellow which shows it is live and then I can use the main dial to change the ISO and you can see when I do that because the exposure comes straight through to the back screen. I can see how that affects the exposure of my video.